选择制造商以查找合适的驱动程序

驱动器名称 文献 硬件 电缆
原始 29 位 CAN 端口驱动程序 原始 29 位 CAN 端口驱动程序 带有 CANOpen 选件卡的 Red Lion 设备 查看文献
Q 系列 TCP/IP 主站 三菱 Q 系列 三菱 Q 系列 PLC 配备适当的以太网通信模块 查看文献
PS4-201 系列 克洛克纳 Moeller PS4-201 - G3 PS4-201 系列 CBLGEN02
Profibus DP Slave 联系技术支持 G3PBDP00 option card installed into G3 or XCPBDP00 option card 联系技术支持
PPP and Modem Client / Server Working with Modems - G3 Generic Modem 25 pin CBLMDM01
PPP and Modem Client / Server Working with Modems - G3 Generic Modem 9 pin CBLMDM00
PLC-CNET 公司 用于 G3 的 IMO PLC-CNET 使用 CNET 的 IMO 系列 查看文献
工厂车间选取框 请参阅 PFM 手册 请参阅 PFM 手册 CBLPFM00
PCOM Binary PCOM Binary Unitronics serial and TCP/IP slave devices supporting the PCOM ASCII Protocol 查看文献
PCOM ASCII格式 Unitronics PCOM ASCII格式 支持 PCOM ASCII 协议的 Unitronics 串行和 TCP/IP 从设备 查看文献
Parker Acroloop Motion Controller Driver Parker Acroloop Motion Controller Driver Parker Acroloop ACR1200 查看文献
G3 到 Paradigm RS485 端口(注 1) RS485 2 线
通过 RS-485 的 Paradigm 请参阅 G3 和 Crimson 手册以及 Red Lion 产品资料 Paradigm RS485 2 线 CBLPAR02
G3 to Paradigm RS232 communications port (Note 1)
通过 RS-232 的 Paradigm 请参阅 G3 和 Crimson 手册以及 Red Lion 产品资料 Paradigm RS232 通信端口 P895803Z
Communications Port
范式 RS-485 请参阅 Crimson 用户手册 任何类似的主/从组合(注 1) CBLPAR02
编程端口 (注 2) CBLRLC01
Paradigm RS-232 Any like master/slave combination (Note 1) CBLPROG0
Paradigm RS-232 参阅Crimson使用手册 主站/从站任意组合 (Note 1) CBLPAR01